Follow

Brother QL-820NWB Printer: Wifi Set-Up

Use the article below to configure your Brother QL-820NWB Label Printer to connect to your network via a WiFi connection.

STEP 1: Press the power button to turn on the printer. Make sure the green status light comes on.

STEP 2:  Press the [Menu] button to view the main menu.

STEP 3:  Use the [▲] and [▼] buttons to scroll and select WLAN > WLAN (On/Off) > On in the settings menu. Press [OK].

STEP 4:  Use the [▲] and [▼] buttons to select WLAN > Infra Manual Setting in your settings menu. Click [OK]. The printer will then search for available Wi-Fi networks.

Note: Your printer and iPad will need to be on the same SSID Wireless network.

STEP 5:  Using the [▲] and [▼] buttons, select your desired network and then click OK.

STEP 6:  Input your password following these steps:

Looking at the top right of the screen, you can click [Menu] to change between inputting uppercase letters, lowercase letters, numbers and symbols.

Then use the [▲] and [▼] buttons to select the correct characters.

If it has successfully connected, it will read “Connected!” Then press [OK].

If it reads that it did not connect, continue to repeat steps 9 through 11 until successful.

STEP 7:  To return to the main screen, click the [↩] button. You should then see the Wi-Fi icon in the top right hand corner.

3.png

 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk